Ministère de l'Enseignement Supérieur et de la Recherche Scientifique

    Université M'hamed Bougarra de Boumerdès
    Unité de Recherche Matériaux, Procédés et Environnement

    Université M'hamed Bougarra de Boumerdès

    Publications internationales de l'Unité de Recherche Matériaux, Procédés et Environnement (URMPE) de l’UMBB

    Publications internationales 2006 - 2005 - 2004

    Publications internationales 2006

    1. Zerizer A, Ouis D. Modeling rot in wood by replacement of wood with sand: an experiemental method. Journal of wood science (2006) Volume 52, Number 3, 2006. The Japan wood research Society.

    2. F. Zibouche, H.Kerdjoudj. Rheological Properties of the Tamazert’s Kaolin; European Journal of Scientific Research ISSN 1450-216X Vol.13 N°1 (2006), pp. 22-30; EuroJournalspublisching, Inc.2006, http://www.eurojounals.com/ejsr.htm

    3. R.Tala –Iglil, M. Boumaour, M.S. Belkaid, A. Mallemi, K. Melhani and A. Iratni " High temperature annealing of sprayed SnO2. F layers in a silicon solar cell process with sreen- printed contacts, Solar Energy Matrail and Solar Cells 90(2006) 1797-1814 www.elsevier.com/locatelsolmat

    4. R. Tala-Ighil, M. Boumaour, A. Iratni, A. Maallemi, The effet of CO reducing atmosphere on the structural and optical properties of SnO2: F films deposited on a SI(N+)/Si(P): Journal 2006,

    5. Zerizer et P. Martin. Liaisons entre effort de coupe, densité et états de surface de quelques composites à base de bois. Mécanique & Industries 7. 521-526 (2006)

    6. D. Djenane, A. Meddahi, P. Roncalès. Les systèmes antioxydants et antimicrobiens pour la conservation de la viande" Antimicrobial and antioxidantsystems for meatpreservation. Édition Lavoisier, revue sciences des aliments, pp 37-73. VOL 26/1–10 janvier 2006.

    7. H. Chemani, J-P Bonnet, M. Nabiev. Elaboration et caractérisation de poudres SnO2 formées à partir de solutions concentrées et diluées d’acide perchlorique. Silicates industriels, Vol 71 N° 11-12, 197-2003, 2006, ISSN 0037-5225.

    8. H. Chemani, J-P Bonnet. Influence de l’ajout de frittage (Fe2O3) sur l’évolution morphologique et microstructurale des poudres céramiques SnO2. L’industrie céramique & verrière N° 1005, 86-93. Mars- Avril 2006. ISSN 0019-9044

    Publications internationales 2005

     1. Zerizer A, Martin P. “Connection between cutting pressures, density and surfaces qualities of some wood containing composites” EJSR European Journal of scientific research Vol.7 N°5, 2005 

    2. Abaîdia S, Kezoula F, Guitoum A. Journal of vacuum science technology. A35-2260, 2005

    3. Abaîdia S, Kadi A, Kezoula F. Thin Film science, 47,135, 2005.

    4. A.Zerizer et P. Martin. « Etude des efforts de coupe et de l’état de surface en toupillage : European Journal of ScientificResearch (ISSN : 1450-216X) Volume.7, N°5, 2005.

    5. K. Boumcheda, J. Paletto, A., G. Fantozzi. Study of proprieties of porous piezoelectric ceramics and impregnated with polymer. J. Phys. IV France 123 (2005) 171-176.

    6. Azzedine Ayadi. The durability of alkali-resistant glass fibres in cement matrix, Journal de physique 123 (2005), 155-158, EDP Sciences

    7. Ayadi A. Palou M. The durability of glass fibers in ciment matrix. Journal de physique 2005, France

    Publications internationales 2006

    1. K. Boumchedda, M.T. Abadlia, A. Kondratas, G. Fantozzi. Elaboration and parameter analysis of porous PZT piezoelectric ceramics ISSN1392-1207 Mechanika. 2004. Nr.1 (45).

    2. ChaidR.abah. Influence of a natural pozzolana on the properties of high performance mortar », Indian Concrete Journal, 78 (8) 22−26, 2004. www.icjonline.com

    3. H. Chemani. Valorisation des déchets de lampes d’éclairage publicet de néons dans les pâtes de carreaux de faïence. L’Industrie céramiques et verrière, N°995, 60-65, juillet-Août 2004

    4. Azzedine Ayadi. Elaboration et caractérisation d’un verre mousse à base de calcin, Journal Verre, France- ISSN 09847979, vol 10, n° 2 – mai 2004, p 68-71

    5. Ait Tahar K., M. Karama, B. Bezzazi, Dehmous H., A. Kondratas. The Influence of Fiber and Combinaison on Rupture Stress and on Elasticity Modulus of Hybrid Composite Material. « Mechanika. 2004, Nr. 5(49). p.25 –30. ISSN 1392-1207.

    6. K. Khider, D.E Akretche, A. Larbot. Purification of water effluent from a milk factory by ultrafiltration using Algerian clay support. Desalination 167 (2004) 147-152.

    7. Abaîdia S, Kezoula F, Guitoum A. Journal of vacuum science technology. A35-2260, 2005 

    8. Abaîdia S, Kadi A, Kezoula F. Thin Film science, 47,135, 2005.