Publications internationales 2009

1. Benmounah, M.Saidi, R.Kheribet, M.Samar, M .Debiane. ‘’Effets des sulfates sur le comportement rhéologique des pâtes cimentaires’’, 19e Congrès Français de mécanique 2009- Marseille du 24 au 28 Aout 2009. Section rhéologie et fluides complexes, université de Provence, Marseille.-France. (ISSN: 2103-6225). www.cfm2009cnrs-mrs.fr

2. Bezazi A., El Mahi A., Berthelot J.-M. & B. Bezzazi. Experimental analysis of behavior and damage of sandwich composite materials in 3-point bending. Part 2. Fatigue test results and damage mechanisms. «Strength of Materials », Vol.41. N°3, Juin, 2009.p.257-267. ISSN 0039-2316. Edition Link Springer New York. http://www.springerlink.com

3. Y. Benlatreche, C. Nouveau, R. Marchal, J-P F. Martins, H. Aknouche ; “Applications of CrAlN ternary System inN WOOD machininG Of medium density fibreboard (MDF)”, Wear. Volume 267, Issues 5-8, 15 June 2009, Pages 1056-1061. ISSN 0043-1648 www.elsevier.com/locate/wear

4. Aknouche H; Outahyon A; Nouveau C; Marchal R; Zerizer A; Butaud J. C. Tool wear effect on cutting forces: In routing process of Aleppo pine wood. Journal of materials processing technology; 2009, vol. 209, no6, pp. 2918-2922 [5page(s) ISSN 0924-0136. Cote INIST: 17574, 35400018672593.0220. www.sciencedirect.com

5. YacineBenlatreche, Corinne Nouveau,* Hamid Aknouche, Luc Imhoff, Nicolas Martin, Joseph Gavoille, Christophe Rousselot, Jean-Yves Rauch, David Pilloud “ Physical and Mechanical Properties of CrAlN and CrSiN Ternary Systems for Wood Machining Applications”. Plasma Process. Polym. Volume 6 (2009) ; pp 114- 117. www.onlinelibrary.wiley.com

6. Abdelhakim Daoui, Clément Descamps, Rémy Marchal, Abdellatif Zerizer « Influence Of LatheChecks on BeechLvlMechanicalProperties » Concepción-Chilie, Mai 2011. Maderas. Ciencia Y Tecnología Concepción, 19/12/10issn Printed 0717-3644 Rubén A. Ananias Scisearch. Scopus. Cas. Csa. Scielo 2009 Impact Factor: 0.367 ISSN online 0718-221X ; ananias@ubiobio.cl

7. MalekAmmar, HachemiMessaoud, Villemin Didier / New approach of depollution of solid chromium leather waste by the use of organic chelates. Economical and environmental impacts. Journal of Hazardous Materials. 170 (2009) 156-162. 2009: ISSN: 0304-3894. http://epsupport.elsevier.com

8. M. Tazrout, M.T. Abadlia et P. Perre: « Caractérisation du comportement mécanique différé du bois d’Eucalyptus camaldulensisDehnh vert provenant de Boudouaou (Algérie) à haute température (120 ◦C) », Revue, Matériaux & Techniques 97, 181–188 (2009), EDP Sciences, DOI : 10.1051/mattech/2009033 ; www.mattech-journal.org

9. Fatima Zibouche, HacèneKerdjoudj, Jean-Baptiste d’Espinose, Henri Van Damme. Geopolymers from Algerian metakaolin. Influence of secondary minerals. Applied Clay Sciences. Vol 43, Issue 3-4, Mars 2009. http://www.elsevier.com/

10. Slimani, A. Iratni, J.-N. Chazalviel, N. Gabouze, F. Ozanam .Experimental study of macropore formation in p-type silicon in a fluoride solution and the transition between macropore formation and electropolishing. ElectrochimicaActa Journal: 2009, vol. 54, no11, pp. 3139-3144 .ISSN 0013- 4686: www.elsevier.com/locate/electacta .

11. H.Belkhafa, R.TalaIghil, S.Sali, S.kermmadi, S.Sili, M.Boumaour, F.Tayour, F.Ait Amar et Si Ahmed : « Effet du recuit de la métallisation par sérigraphie sur les propriétés optiques des couches minces de ZnO déposées par spray. » Revue des Energies Renouvelables Vol.12 N°3(2009) 347-354 46

12. Abaidia et al, Elaboration and structural analysis of TiN coating on steel and Titanium alloy substrates, International Review of PHYSICS, 2009 www.praiseworthyprize.com/IREPHY.htm

Publications internationales 2008

 

1. D. Aboutaleb, A. Iratni and B. Safi; Effect of isothermal heat treatment time on structural transformation and crystallization of B2O3-PbO glass, Matériaux& Techniques Vol. 96, 4-5, (2008), pp. 181 – 187. http://www.mattech-journal.org/

2. Slimani A, A. Iratnia, et all. Experimental study of macropore formation in p-type silicon in a fluoride solution and the transition between macropore formation and electropolishing, ElectrochimicaActa, Elsevier, 2008.

3. H. Aknouche, A. Outahyon, C. Zerizer and J.C. Tool wear effect on cutting forces: In routing process of Aleppo pine wood, Journal of Materials Processing Technology, 2008.

4. Bouhafs, Moussi, Boumaour, Abaidia, Mahiou. N+ silicon solar cells emitters realized using phosphoric acid as doping source in a spray, Thin solid films, www.sciencedirect.com

5. Abaidia et al.; Structural Study And Optical Properties Of TiO2Thin Films Elaborated By Thermal Oxidation Of RF Magnetron Sputtered Ti Films, Laser and Plasma Applications in Materials, Science, 2008 American Institute of Physics 978-0-7354-0575-2/08/$23.00.

6. H. Aknouche, A. Zerizer, B. Chemani. Influence de L’angle d’inclinaison des cannelures sur le comportement à L’usure des cylindres broyeurs de blé, European Journal of ScientificResearch, ISSN 1450- 216X Vol.19 No.2 (2008), pp.215-221, www.eurojournals.com/ejsr.htm

7. Malek A; M. Hachemi. Effet of the detoxification on the shrinkage temperature and pH of chromium leather waste, another promising way for the tannery pollution, American journal of Applied Science 5 , 2008, www.csipub.org

8. Daoui A. Zerizer A. R. Marchal. Determination of elasticity modulus of aleppo pine wood (Pinushalepensis mill.) with the ultrasound methods/ ProLigno 2008 Issue 4 / Scientific Article, Vol. 4. nr 4. December 2008

9. Malek A; M. Hachemi. New approach of solid leather waste depollution by the use of organic chelating economic and environmental impacts, Journal of hazardous materials. Elsevier, 2008.

10. Ghernouti Y, Aittahar K. «Multiple confinements of concrete columns by various embedded composite grids ", Journal of reinforced plastics and composites- SAGE Publications /2008. http://jrp.sagepub.com

11. Fatima Zibouche, HacèneKerdjoudj, Jean-Baptiste d'Espinose, H. Van Damme. Geopolymers from Algerian metakaolin. Influence of secondary minerals Applied Clay Science, Volume 43, Issues 3-4, (2008). Pages 453-458.

12. Malek A; M. Hachemi. Chemical coagulation /Floculation treatment of chemical mechanical polishing (CMP) wastewater from photovoltaic industry. Accepted manuscrit. Journal of Hazardousmaterials. Juillet

Publications internationales 2007

 

1. Chaîd R., Jauberthie R., Abadlia M-T. et Bali A. « Caractéristiques physico-mécaniques et microstructurale des BHP de laitier », Revue : Annales du Bâtiment et des Travaux Publics, Édition ESKA, Avril - Juin 2007, N° 2- 3, p. 49-56.

2. D.Bouhafs1, A Moussi1, M Boumaour1, S E K Abaîdia, L Mahiou1 and A Messaoud. Influence of the organic solvents on the properties of the phosphoric acid dopant emulsion deposited on multicrystalline silicon wafers. Journal of physics D : AppliedPhysics. 40 (2007) 2728–2731. Published 19 April 2007.

3. D Bouhafs1, S. Abaidia and all. organic solvents on the phosphoric acid dopant on multicrystalline, J.Phys. D: Appl. Phys. 40 (2007) 2728–2731; Journal of physics D: Applied Physics

4. D.Bouhafs1, M Boumaour1, A Moussi1, S E K Abaîdia and L Mahiou1. 10x10 cm² multycristalline silicon solar cells realised with H3PO4_2 butanol emulsion as phosphorous doping source. Journal of the association of arab universities for basic and applied sciences, ISSN 1815-3852 2007

5. Bezazi, A El Mahi,J.M. Berthelot, B Bezzazi. Experimental analysis of behavior and damage of sandwich composite materials in three point bending. Part 1. Static tests and stiffness degradation at failure studies. Joural, strength of materials. Vol. 39, N°2, Mars 2007. Editeur Springer Science. New York. ISSN 0039-2316

6. Boumchedda K., M. Hamadi, G. Fantozzi. Properties of a hydrophone produced with porous PZT ceramic; Journal European Ceramic Society 27 (2007) 4169-4171.

7. ZerizerA et all: “Experimental Method for determining fracture Parameters of Glued Wood: Case of MDF” Proligno Scientific journal in the field of the wood Vol. 3. No 2. 2007

8. Zerizer A et all ’’ valorisation du bois de pin d’Alep par déroulage : optimisation de son étuvage’’ Revue bois et forêts des tropiques, N° 294 (4) (51, 65), 2007

9. Dehmous H, Welmane H, Karama.M, Aittahar.k.“ Reliability approach for fibre-reinforced composite design”,International Journal for simulation and multidisciplinary design optimization, IJSMDO//ISI/02, vol 2 p1-9 Ed. EDP, ISSN (Print Edition) : 1779-627X, 2007.

10. Zerizer A et all ‘’Liaison entre effort de coupe, densité et états de surface de quelques composites à base de bois“ Mécanique & Industries 7.521-526(2006) publié en ligne le 21 Mars 2007.

11. Dehmous H, Welmane H, Karama.M, Aittahar.k. “Reliability approach for fibre-reinforced composite design”, International Journal for simulation and multidisciplinary design optimization, IJSMDO/2007/ISI/02, vol 2 p1-9 Ed.: 1779-627X. www.ijsmdo.org

12. Hamiane Messaoud. Caractérisation des mortiers archéologiques, le cas des sites historiques de Djemila et de la citadelle d’Alger). Rehiabimed en ligne.2007. http://www.rehabimed.net

13. Chaid R, Abadlia M-T et all. Apport des fillers calcaires à la durabilité des BHP en milieu sulfatique. Revue : Matériaux & Techniques, EDP - sciences, www.edpsciences.org/mattech